Read + Write + Report
Home | Start a blog | About Orble | FAQ | Sites | Writers | Advertise | My Orble | Login

Card Idea Gallery - Craft Scope

Torn Paper Flower Card

September 30th 2008 07:29
Torn Flower Paper Card Free Card Making Instructions sewing rhinestones
Torn Paper Flower Card


Materials Required

1. Sewing Machine with white cotton
2. Card: Dark brown; medium brown
3. Paper: Scenic Route Paper Company SR 267 - Cape Town Signal Hill Floral; Overton House Designs SCBP05 - Seaside - Dots / Green Solid
4. Embellishments: Kaiser Self adhesive Rhinestones
5. Cutting Tools: Paper Trimmer
6. Other: Punch Wheel
7. Adhesives: Double Sided sticky Tape (DSST)

Instructions

1. Fold Medium Brown Card 300mm x 150mm in half to make a base card.

2. Cut a piece of Seaside Paper 142mm x 142mm. Tear a flower from the Cape Town Paper and attach it to the Seaside paper using a small piece of DSST in the cetnre of the flower.

3. Sew zigzag around the outside of the torn flower.

4. Back this with a piece of dark brown card 145mm x 145mm using DSST, then attach it to the base card.

5. Cut two strips of dark brown card 6mm wide, one145mm long and the other 160mm long. Run a punch wheel along the long edges. Tear the ends on the diagonal. Attach them to the card using DSST, using the photo as a guide to placement. The top ends of the strips fold around the card and attach to the inside of the card.

6. Randommly attach some thinestones over a few of the the spots.

Torn Flower Paper Card Free Card Making Instructions sewing rhinestones
23
Vote
Add CommentsAdd Comments
[ Link ]
   


Flower Trio Card

September 24th 2008 06:40
Flower Card making free instructions craft
Flower Trio Card


Materials Required

1. Stamps: Autumn Leaves Clear Stamps flowers stamps by rhonna farrer (set of 12)
2. Inks: Osmer Embossing Markers 8 Colors Spring Set; Versamark watermark ink pad
3. Card: Light Blue and White
4. Ribbon: Large see-through Blue and medium solid rainbow
5. Blending Chalks
6. Cotton Buds
7. 4 small silver brads
8. Double sided Sticky tape (DSST)
9. Punch Wheel

Instructions

1. Stamp the flower trio image onto white card 80mm x 650mm using the different coloured embossing markers to ink the stamp.
2. When the ink is dry, carefully rub pink and orange blending chalks over and around the flower heads using the cotton buds.
3. Run a punch wheel around the perimeter, then insert a brad into each corner.
4. Fold a piece of light blue card 210mm x 150mm in half to make the greeting card.
5. Use the versamark ink pad to stamp flower images randomly over the front of the card.
6. Use DSST to attach the ribbons, as shown.
7. Use DSST to attach the flower trio over the top.


22
Vote
Shared on
Add CommentsAdd Comments
[ Link ]
   


Card Gallery - Stamping with bleach 2 - Free Card making Instructions

August 11th 2008 06:23
Stamping with Bleach - Free Card Making instructions craft
Stamping with Bleach - three card ideas


Here are some more card ideas for stamping with bleach. I love the browns, but you can use any colour you choose.

To see instructions for stamping with bleach, see my previous post on stamping with bleach.

Stamping with bleach free card making idea craft birthday
Stamping with Bleach - Flower Birthday Card


Card 1 - Flower Birthday Card

In this card I stamped with bleach onto dark brown card - using a flower stamp from Autumn Leaves Clear stamps "flower stamps by rhonna farrer" selection. Once the bleach had dried I stamped the images over again with black ink.

I cut out a rectangular section from this measuring approx 11cm x 9cmm and mounted it onto a piece of light brown card approx 12cm x10cm.
I also punched two tags, one from the dark brown card, and one from the light brown card. I have stamped "happy birthday" onto the dark brown tag, overlying the flower design (using the happy birthday stamp from the Stampin Up set, Birthday Whimsy).

I used a medium brown card (21cm x 15cm, scored in half and folded to make a greeting card).

Onto this I have put three lengths of brown ribbon approx 8cm long each, each folded in half and secured with double sided tape and with a eyelet near the folded end.
The two tags are layed on top of each other, and have a small brad (paper fastener) matching the eyelets as per photograph.
The rectangular piece (made above) is attached as well, covering the unfolded end of the ribbons.

See the photograph above for positioning.

Stamping with bleach free card making idea craft birthday
Stamping with Bleach - Birthday Tag Card


Card 2 - Birthday Tag Card

In this card I again stamped with bleach onto dark brown card - using a flower stamp from Autumn Leaves Clear stamps "flower stamps by rhonna farrer" selection.
On a different piece of the same colour card, I stamped the words "Happy Birthday" with bleach (the happy birthday stamp is form the Birthday Whimsy set by Stampin Up).

Once the bleach had dried I stamped the images over again with black ink.

Using a Tag punch, I cut out two tags with flower design and two with Happy birthday on them. I positioned a square brad in the end of the two tags with flower designs.

I then attached the tags onto a piece of light brown card (approx 5.5cm x 11cm). This I attached onto a piece of dark brown card (approx 12cm x 6.5xm) cut from the same card as the punched flower tags.

I made a greeting card from cream card (21cm x 15cm piece of card, scored down the middle and folded in half).

Taking three pieces of brown ribbon approx 6cm long, I folded them in half (held with double sided tape), and attached them to the card as shown.

Three metal brads were used near the folded ends of the ribbon.

The Tag section (made above) was then adhered to the card, covering the unfolded ends of the ribbon.

See the photograph above for positioning.

Stamping with Bleach - Free Card Making instructions craft birthday
Stamping with Bleach - Flower Birthday Card 2



Card 3 - Flower Birthday Card 2

In this card I again stamped with bleach onto dark brown card - using a "Happy Birthday" stamp by Stamp-It "Happy Birthday" 1174D, and a stamp with three flowers in a row taken from a set called "Gardenia, bu Ruby Makenna 92610.

Once the bleach had dried I stamped the images over again with black ink.

These I cut out - The happy birthday to measure approx 6cm x 4cm and the flowers to measure approx 6.5 x 3.5 cm.

I layered them onto pieces of cream card (approx 7cm x 5cm for the happy birthday and 7.5 x 4.5cm for the flowers). Before attaching them I sponged the edges of the cream card with brown ink.

I positioned them onto a medium brown greeting card (21cm x 15cm scored, and folded in half) whose edges I had sponged with brown ink, as shown in the photo above.

Across the middle of the card I attached a strip of brown leather approx 10cm long.

Over the leather strip I positioned 3 cream paper flowers with metallic brads used as centres.

34
Vote
Shared on
Add CommentsAdd Comments
[ Link ]
   


Card Making - Stamping with bleach - Free

August 5th 2008 11:37
Stamping with Bleach


These two cards were made using bleach to stamp an image onto paper, and later stamping the same image over again, using coloured ink. Using different papers textures and colours creates different effects


[ Click here to read more ]
47
Vote
Shared on
Read MoreRead More Comments (2)Comments (2) Add CommentsAdd Comments
[ Link ]
   




[ Craft Scope Home ] [ Create A New Post ]

Jude O'Connell's Blogs

I have no other blogs :(
Moderated by Jude O'Connell
Copyright © 2006 2007 2008 On Topic Media PTY LTD. All Rights Reserved. Design by Vimu.com.
On Topic Media ZPages: Sydney |  Melbourne |  Brisbane |  London |  Birmingham |  Leeds     [ Advertise ] [ Contact Us ] [ Privacy Policy ]